CASTROL Aircol PD 100
Lubricante de compresor de tornillo rotativo
Application CASTROL Aircol PD 100
Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification – VDL; ISO 6743/3 – DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.
- VGood water separation characteristics allows condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
- Totalmente inhibido contra la corrosión que permite la protección incluso cuando se opera en condiciones húmedas.
- Una buena estabilidad térmica, baja volatilidad y baja formación de carbono reduce el riesgo de incendio y explosión y lleva a una mayor vida útil (hasta 2000 horas).
- Las tendencias de formación de depósitos bajos extienden los intervalos de cambio de aceite y proporcionan una mayor vida útil del filtro de aire, lo que contribuye a una reducción de los costos de mantenimiento.
- Las excelentes propiedades de coalescencia significan poca arrastre de aceite en la corriente de aire.
Si tiene alguna pregunta, póngase en contacto con el servicio de asistencia técnica de ProCare
Product Description CASTROL Aircol PD 100
Castrol Los aceites PD Aircol™ son una gama de lubricantes de compresor, basados en aceites minerales altamente refinados, que están destinados a la lubricación de compresores de aire rotatorios y recíprocos.
Características típicas
| Especificaciones del producto: | CASTROL Aircol PD 100 | |
| Densidad a 15°C / 59°F kg/m³ | ISO 12185 / ASTM D4052 | 890 |
| Viscosidad cinemática a 40°C / 104°F mm²/s | ISO 3104 / ASTM D445 | 100 |
| Viscosidad cinemática a 100°C / 212°F mm²/s | ISO 3104 / ASTM D445 | 11.4 |
| Índice de viscosidad | ISO 2909 / ASTM D2270 | 98 |
| Secuencia de espuma I – Tendencia / Estabilidad ml/ml | ISO 6247 / ASTM D892 | 30/0 |
| Punto de inflamación: método de copa abierta °C/°F | ISO 2592 / ASTM D92 | 253/ 487 |
| Punto de vertido ºC/°F | ISO 3016 / ASTM D97 | -12/10 |
| Separación de agua a 54°C / 129°F (40/37/3) min | ISO 6614 / ASTM D1401 | - |
| Separación de agua a 54°C / 129°F (40/37/3) min | ISO 6614 / ASTM D1401 | 20 |
| Prueba de óxido – agua de mar sintética (24 horas) | ISO 7120 / ASTM D665B | escamote |
| Residuos de carbono - Prueba de Conradson - Después del envejecimiento del aire %WT | DIN 51352-2 | <3.0 |
| Estabilidad de oxidación: prueba de recipientes a presión giratoria | ASTM D2272 / IP 229 | - |
información adicional
Castrol Aircol PD compressor oils are available in a wide range of viscosities, to suit different types of compressors operating in varying ambient temperatures. Selection of the required viscosity grade should be based upon the compressor manufacturers recommendations for the appropriate ambient temperature range, which will have been chosen to provide the best compromise between maintaining a fluid film between the working surface and minimising the amount of power absorbed by fluid friction in this oil film.
Explora más: Castrol aircol
English 
Spanish 
German 
French 
Italian 
Portuguese