Description:
Liqui Moly Liquimate 8300 Seam Sealant Black
This Liqui Moly Liquimate 8300 Seam Sealant Black is a high-grade, 1-component MS polymer-based sealant, designed for professional-quality seam sealing. Free of isocyanate and silicone, this sealant is resistant to UV rays and mineral oils. It can be painted over wet-on-wet with most commercially available paints, with a maximum paintability window of 2 hours.
Ideal for sealing seams during repairs, it helps restore the vehicle to its original factory condition. Suitable for use in areas such as the engine compartment, trunk, and wheel housings.
Benefits:
- Waterproof
- Free of isocyanate
- Can be used without primer
- Silicone-free
- Permanently elastic after curing
- Can be applied as a spray or with a brush
- Outstanding rigidity
- Broad adhesive spectrum
- odorless
- Resistant to mineral oils
- Can be painted over wet-in-wet
- High resistance to aging
- Sealing compound and sprayable seam sealant
- Easy to use
- Professional repairs
- High adhesive strength
- Fast-drying
Technical Information:
| Property | Specification |
|---|---|
| Curing Rate at 23 °C / 50% RH | ~ 3 mm/24 h (DIN 50 015) |
| Skin Formation Time at 23 °C / 50% RH | 20 min (DIN 50 015) |
| colour / Appearance | Black |
| Elongation at Break | 250% |
| Hardness, Shore A | 47 (DIN 53 505) |
| Thermal Stability After Curing | -120 °C |
| Tensile Strength | 2.1 N/mm² |
| Form | Pastelike |
| Odor | Petrol-like |
| Curing System | Cured by Moisture in the Air |
| Density at 20 °C | 1.38 g/cm³ |
| Base | MS-Polymer |
| Tear Growth Resistance | 5 N/mm (DIN 53515) |
| Shelf Life in Original Sealed Container | 18 Months |
| Recommended Storage Temperature | ≤ 25 °C |
